Balcatta St Andrew's Aged Care
St Andrew’s opened in February 1999 at 20 Burwood Road, Balcatta. It was built to replace the Subiaco Nursing Home, which had been operating since 1965 and could no longer be upgraded to meet aged care standards. When the new home opened, 31 residents moved from Subiaco to Balcatta.
The original aged care home
The Balcatta home had 75 units and was built alongside Juniper Central, the new state office for Uniting Church Homes. The office opened in August 1998, six months before the aged care home. Uniting Church Homes, the Commonwealth Government and Lotterywest funded the project. The office was later expanded and upgraded in 2006 and again in 2012.
St Andrew’s was the first Uniting Church Homes facility to bring residents with both high and low care needs into the same home under the federal aged care changes introduced in 1997. The complex was designed in a Mediterranean style and had five buildings named after people connected with the church’s work in Western Australia. Two of them, Methodist minister Alfred Canning and social worker Jane Deakin, had helped establish the Subiaco Nursing Home. Another was Alfred Hensman, the former attorney-general and Supreme Court judge whose name was also given to Hensman Street, where the Subiaco home had stood.
The Balcatta site was also used to help older people who were still living in their own homes. Uniting Church Homes began offering Commonwealth-funded home care packages through St Andrew’s in 1998. It started with 20 packages in Balcatta and, within three years, was providing 92 across four of its sites. A community garden called Juniper Gardens opened at St Andrew’s in December 2015.
Closure and plans to reopen
The Aged Care Quality and Safety Commission lists St Andrew’s as offline. Its published audit records show that the home met all 44 accreditation requirements assessed in October 2017 and was accredited until 13 December 2020.
On 2 June 2026, Juniper announced that refurbishment work had begun on the existing building. The plan is to reopen St Andrew’s with 76 residential aged care beds. Juniper estimated it would take about 18 months to bring the building back into use and said refurbishing it would allow the beds to become available sooner than building a new home.
November 2024

Bentley SwanCare Aged Care
I took these photos in December 2024 while I was in Bentley. I’d been told that some of the buildings around Talbot Place and Graham Crescent were going to be demolished and redeveloped, so I stopped to get a few photos while I was in the area. I only meant for them to be a placeholder until I could come back in daylight or get permission. I kept the visit short because it was already dark and I didn’t want to disturb anyone living there. I never ended up going back.
What I photographed
The photos cover the village grocery store, the buildings marked 17 to 19 on Graham Crescent and those marked 20 to 24 on Talbot Place. I’ve used the numbers shown on SwanCare’s campus map to identify them in the photos. The building marked 19 on Graham Crescent had a sign reading The Village Exchange when I visited.
From Swan Cottage Homes to Bentley Park
SwanCare began as Swan Cottage Homes in 1961. Richard Cleaver helped establish the cottages, which initially housed war widows. The village started on eight acres of pine forest in Bentley and expanded over the following decades. The Bentley Park campus now includes independent retirement housing and four residential aged care centres. The shops and units in these photos are part of the retirement village.
By the time I took these photos, plans for a three-storey block of 18 apartments near the village shops had already been put forward. The application was advertised in 2024 under the campus address of 127-143 Hill View Terrace. Within the village, the apartment site sits behind the shops on Adie Court, beside Talbot Place and Grandis Boulevard. SwanCare calls the development Maya Apartments and lists it as currently under construction.
The demolition drawing shows the grocery store next to the work area and SwanCare’s apartment information still lists the grocery store and hairdresser as nearby shops. I’ve been able to confirm the apartment development beside Talbot Place. I’m still looking for plans that show which of the buildings I photographed, including The Village Exchange, were earmarked for demolition.
December 2024

Bentley SwanCare Ningana Aged Care
SwanCare Ningana opened in 2020 at 3 Allen Court, Bentley, with 124 residential aged care rooms. The same address appears in government records for Nyandi, which opened in 1970 as a detention and treatment centre for teenage girls. Nyandi included an open residential cottage called Gwynne Lea, while the secure buildings were later used as a women’s prison.
Nyandi Girls’ Treatment Centre
The Child Welfare Department opened Nyandi in February 1970. Some girls were sent there after appearing in court for offences, while others were placed there under child welfare arrangements. The secure section had ten single cabins and a separate group living area for another ten girls, with its own kitchen, living room and courtyard. The centre also had classrooms and spaces for training in office work, sewing and cooking.
Gwynne Lea cottage
Gwynne Lea opened in 1970 as a less restrictive part of Nyandi. Girls initially moved there from the secure section, and by 1978 the cottage could also take girls directly from the community. They could stay for up to three months and go out to school or work during the day. In 1977, some girls spent weekends with host families. Find & Connect records that around eight to ten girls lived at the cottage at a time in its earlier years, falling to four or five by the 1980s. Nyandi and the cottage transferred to the Ministry of Justice in 1993 and Gwynne Lea had closed by 1997.
Nyandi Women’s Prison
The former Nyandi youth detention centre is across the road from what is now Ningana Aged Care. The centre closed in October 1997 and part of it reopened the following year as a temporary minimum-security prison for women to ease overcrowding at Bandyup Women’s Prison. The first women were transferred to Nyandi on 14 December 1998. The prison remained open until 2004, when the Boronia Pre-release Centre for Women took over its role. The former prison buildings were later used to train Corrective Services staff and appear to still be used for training.
Building SwanCare Ningana
Construction was underway by late 2018. Cameron Chisholm Nicol designed the aged care home and ADCO Constructions built it. The main structure was complete in 2019, and SwanCare advertised a March 2020 opening. Its annual report confirms that Ningana opened in 2020, along with a new laundry for the campus. The project also included basement visitor parking and a separate delivery area. The refurbished Spritz café reopened for residents and visitors from both Ningana and the adjoining Kingia aged care home.
Ningana has four levels above a basement. The private rooms are grouped in sets of eight or nine, each with a shared lounge, dining area and kitchenette. Some larger rooms were designed for couples or siblings. The building runs in a loop around a central courtyard, and a sheltered winter garden gives residents a place to spend time outdoors. SwanCare says the layout was designed to help residents experiencing memory loss find their way around.
The tower crane
FG Cranes’ Potain MC310K12 tower crane went up on 25 October 2018. It was manufactured in 2008, carried the serial number 350257. The inspection report records a 31.7-metre mast and a 60-metre jib. The crane could lift up to 12 tonnes closer to the mast and just under 3.5 tonnes at the end of the jib.
Equipment Logistics & Consultancy inspected the crane on 26 October 2018, the day after it went up. During the inspection it lifted 13,170kgs at a radius of 11.51 metres as part of a load test. WorkSafe registered the crane to FG Cranes Pty Ltd at 3 Allen Court on 31 October 2018, under plant registration WC21179.
The crane was dismantled on 25 November 2019, exactly 13 months after it went up. FG Cranes’ drawings specified a 300-tonne Grove GMK6300L mobile crane for both jobs, with a different setup position for each. The dismantling study called for the 60-metre jib to come down in two sections, one 10 metres long and the other 50 metres long.
November 2024

.png)
















































